Home

HG8245Q WAN Configuration

HG8245Q status WAN LAN IPv6 WLAN security System Tools > Configuration File Route Forward Rules Network Application Voice System T(ns On this page you can save the current configuration file to the flash memory[ You can also save the current configuration files to the flash memory and enable the device to automatically restar Save Save and Restar

The Huawei EchoLife HG8245Q is a routing-type ONT in the Huawei all-optical access solution. It uses the GPON technology to implement ultra-broadband access for users. It provides 4 GE+2 POTS+2 USB+2 WiFi (4 GE ports, 2 POTS ports, 2 USB port, 1 2.4G WiFi port and 1 5G WiFi port) Login to your Huawei HG8245Q router. Navigate to the port forwarding section. Click the Forward Rules link. Click on Port Mapping Configuration. Create a port forward entry. While these steps might seem difficult at first, we will walk you through each step for your Huawei HG8245Q - DigicelPlay router DHCP Server Configuration for the Huawei HG8245Q - DigicelPlayRouter Sceenshot

Huawei EchoLife HG8245Q Support Guide, Manuals & PDF - Huawe

This is a short story, about accessing HG8245Q shell through Telnet, the whole process took me less than 15 minutes to finish. In this article, I will show you how to: Scan for open ports using nmap (searching for telnet). Connect to the CLI via telnet, using default credentials. Access the configuration mode, and solve the challenge string الكثير يكلف على نفسه و يشتري مقوي او موزع شبكة بأسعار غالية ولاتعطي نتيجة مرضية ابداً. شرح تحويل راوتر HG8245Q مقوي شبكة لنفس الراوتر. أولا نحتاج نعمل فورمات للجهاز المقوي وليس الأساسي. الطريقة مشروحة في هذا الموضوع وكذلك تفعيل LAN ( مداخل الإيثرنت ) https://www.adslgate.com/dsl/showthr...post&t=2536847

شرح تحويل راوتر hg8245q مقوي شبكة لنفس الراوتر أولا نحتاج نعمل فورمات للجهاز المقوي وليس الأساسي الطريقة مشروحة في هذا الموضوع وكذلك تفعيل LAN ( مداخل الإيثرنت How to Configure WAN Interfaces. By default, ports p2 and p3 are preconfigured. In the event that you need to design a WAN interface for both of these ports, you may need to evacuate the default configurations: • Port p2 - Initially, the system interface for port p2 is designed as a powerful system interface named DHCP 4a. Konfiguracja WLAN modele HG8245Q/HS8546V/ HS8145V). W powyższych modelach konfiguracja WLAN dzieli się na 2,4GHz (802.11b/g/n) oraz 5GHz (802.11ac). Dla obu standardów konfiguruje się osobne nazwy sieci (SSID) i hasła. Zmian dokonujemy w pozycjach 2,4G Basic Network Settings oraz 5G Basic Network Settings Settings Configuration for 2.4 GHz and 5 GHz Frequencies. 5GHz و 2.4GHz تاددﺮﺗ داﺪﻋإ ﺔﻘﯾﺮﻃ Settings Configuration for 2.4 GHz and 5 GHz Frequencies. HG8245Q (Huawei ONT) STEP 1. Open Browser and Enter 192.168.100.1 in the Address Bar as mentioned below. STEP 2. Enter username and password and click on Login

Simple Huawei HG8245Q Router Open Port Guid

  1. Router Screenshots for the Huawei HG8245Q - DigicelPlay. 2.4G Advanced Network Settings. 2.4G Basic Network Settings. 5G Advanced Network Settings. 5G Basic Network Settings. ALG Configuration. ARP Configuration. Advanced Power Management. Automatic WiFi Shutdown
  2. Huawei ONT WAN DHCP configure by web browser For more details visit: http://gponsolution.co
  3. . Password: ad
  4. Step 1 - Connect Ethernet cable and access router configuration. Connect the WAN port of the DrayTek Vigor router to your Ethernet Internet source with an RJ-45 Ethernet cable (either a patch or cross-over lead, the port is auto-sensing of which type of cable is used).. Access the DrayTek Vigor router's web interface, more information.The router's default IP address is 192.168.1.1, we.
  5. HG8245Q Bridge Mode with DrayTek Vigor 2926 - YouTube. HG8245Q Bridge Mode with DrayTek Vigor 2926. Watch later. Share. Copy link. Info. Shopping. Tap to unmute. If playback doesn't begin shortly.
  6. Here is the configuration that you will put in the Core Switch (the configuration might need to be reviewed based on the model/IOS version of your core switch if you have one): vlan 50 name LAN Interface vlan 50 description LAN_USER ip address 192.168.1.1 255.255.255. no shut Interface Fa0/24 switchport switchport trunk allowed vlan 5

Huawei HG8245Q - DigicelPlay DHCP Server Configuration

The organization-name setting must match what you used in the PnP vBond profile and be the same across all SD-WAN devices in the fabric. All devices in the fabric must also know how to reach a vBond. The vBond image is the same as the vEdge Cloud, so the local vbond-only configuration is how the VM knows to function as a vBond for the fabric.. In Cisco SD-WAN terms, a VPN is very similar in. Huawei HG8245Q Configure Old Batelco Fiber Optic Routers to use as Access Points. Call/WhatsApp 396 - show phone -. Extend your home/office WiFi Network, Configure Old Routers to use as Access Points. Next Ad

Accessing HG8245Q Shell Through Telnet Jalal Sel

Using WAN Load-Balancing, traffic sessions from the LAN clients are balanced across the WAN ports. The EdgeRouter configuration wizard provides a quick and easy setup of the Load-Balancing feature: GUI: Access the EdgeRouter Web UI. 1. Navigate to the Wizards tab to configure the Load-Balancing feature config rule 'forward_from_master_net' option src wan option dest lan option src_ip '192.168.10./24' option proto all option target ACCEPT #this means: if a packet, of whatever protocol, is coming on the wan side from a source in 192.168.10./24 # and the routing rules are sending it towards the lan side, let it pass Configuration Last updated; Save as PDF No headers. Cisco SD-WAN documentation is now accessible via the Cisco Product Support portal. For the latest Cisco vManage How-Tos content for Cisco vEdge devices, see Cisco vManage How-Tos for Cisco vEdge Routers.. For the latest Cisco vManage How-Tos content for Cisco IOS-XE SD-WAN devices, see Cisco vManage How-Tos for Cisco IOS XE SD-WAN Devices

البوابة الرقمية Adslgate - شرح تحويل راوتر Hg8245q مقوي شبك

Install the SD-WAN Plugin. Set Up Panorama and Firewalls for SD-WAN. Create a Link Tag. Configure an SD-WAN Interface Profile. Configure a Physical Ethernet Interface for SD-WAN. Configure a Virtual SD-WAN Interface. Create a Default Route to the SD-WAN Interface. Create a Path Quality Profile. SD-WAN Traffic Distribution Profiles The IPv6 configuration allows you to enable and configure IPv6 for a WAN device. These settings should be configured in combination with the IPv6 LAN settings (go to Networking → Local Networks → Local IP Networks , select desired LAN under Local IP Networks , and select Edit ) to achieve the desired result This article gives some examples on policy based routing with the UniFi Security Gateway. UniFi and the USG models currently support Load Balancing or Failover when configuring Dual WAN setup in UniFi however if you want to configure a more advanced Policy Based Routing then this guide is for you 4. Configure Dual WAN Failover on Single Cisco Router. The first thing that we need to do here to have WAN redundancy with multiple internet connections is to configure dynamic NAT, dynamic network address translation, on Cisco router that connected directly to two ISP. So, clients computer within the internal network can reach to internet

An easy way to get to know your WAN IP address and UA (user agent) or to test your PROXY. Your Wan IP address is: 4 40 3.3 77 0.6 167 0.3 99 3. Interesting info we could get from the Wan IP address: Host address: 4 40 3.3 77 0.6 167 0.3 99 3 - msnbot-40-77-167-99.search.msn.com: Country: US United States: ISP Enable SD-WAN and add the interfaces as members: config system virtual-wan-link set status enable config members edit 1 set interface wan1 set gateway 172.16.20.2. next edit 2 set interface wan2 set gateway 10.100.20.2. next. end. end. Configure a static route: config router static edit 1 set distance 1 set virtual-wan-link enable.

Huawei EchoLife HG8245H 4GE/FE+2VOICE+WIFI+USB ONT Wifi

WAN Configuration You can configure at most four WAN ports. Each WAN port can have its own WAN connection, providing link backup and load balancing. To complete WAN configuration, follow these steps: 1) Configure the number of WAN ports. 2) Configure the WAN connection. 2.1 Configuring the Number of WAN Port WAN Setup Wizard. The initial setup wizard will appear when logging-in to the ZyWALL's WebUI for the first time. Follow the prompts to setup the WAN port connection. Click Next to run the wizard setup for internet access. Note: If the Installation Setup Wizard does not appear when you , run the wizard manually Configure a WAN interface. To configure a WAN interface: Go to the NETWORK > IP Configuration page. If your WAN interface has a static IP address: In the Static Interface Configuration section, click Add Static Network Interface. Configure the static interface settings, including the gateway address. Click Add The IXrouter's WAN configuration determines how the IXrouter connects to the IXON Cloud.Depending on your IXrouter model, you can configure it to connect via a wired, wireless, or cellular network.. You can also configure multiple connections (max. one of each type) which will then be used as fallback connections when the preferred connection is unavailable

OverviewWireless WAN is wide area network (WAN) for data that is typically provided by the cellular carriers to transmit a wireless signal over a range of several miles to a mobile device.WWAN connectivity allows a user with a laptop and a WWAN support to use the web, or connect to a VPN from anywhere within the regional boundaries of cellular service SD-WAN (software-defined wide area networking) policy routing allows you to implement routing decisions based on the policies that you specify. How to configure SD-WAN policy routes You can use SD-WAN policies to route traffic from a branch office to the head office and to cloud applications using the MPLS network and ISP links

Step by step instructions to Configure WAN Interface

Router Screenshots for the Huawei HG8245Q - DigicelPlay

Configure Amazon Web Services (AWS) Obtain Amazon Web Services Configuration Details. Configure a Non-VeloCloud Site. Configure Zscaler. Step 1: Create and Configure a Non-VeloCloud Site. Step 2: Add to a Configuration Profile. Step 3: Configure Zscaler. Step 4: Configure Business Priority Rules. Configuration Tasks Network configuration: Home. This section act as an anchor for network configuration. The Home page provides the ability to initiate most of the commonly needed configuration actions, such as the ability to: Add a site. Batch adds multiple sites at once. Deploy configuration or upgrade software, and track the progress To create a new BOND (WAN): In the Internet Connection page, to create a new internet connection, click Configure internet.. The New Internet Connection window opens in the Configuration tab.. Under Internet Configuration, enter the Connection name.. For Interface, select New link aggregation (Bond).. For Ports, select a minimum of 2 interfaces that are unassigned and disabled The WAN link manager allows you to configure gateways to support link failover and load balancing. Go to Network > WAN link manager.. WAN gateways: When you configure a physical WAN interface on Network > Interfaces, you also specify its gateway settings based on your ISP link. If you have more than one ISP link, you can terminate each link on a physical WAN interface

DESCRIPTION: This article lists all the popular SonicWall configurations that are common in most firewall deployments. Configuring LAN Interface. Configuring the WAN (X1) connection. Configuring other interfaces (X2, X3 or DMZ etc) Port forwarding to a server behind SONICWALL. Configuring remote VPN connections (GroupVPN, GVC, SSL-VPN, L2TP, etc. ROUTER1(config)# ip route 0.0.0.0 0.0.0.0 1.1.1.100 <- Default Gateway route to ISP ROUTER2. The configuration is similar but we don't have to configure tracking on this router. ROUTER2(config)# interface ethernet 0/0 ROUTER2(config-if)# description WAN Interface ROUTER2(config-if)# ip address 1.1.1.2 255.255.255. ROUTER2(config-if)# no shut ROUTER2(config-if)# standby 1 ip 1.1.1.3 <- The.

UniFi Network Configuration, Routing and Switching - Ubiquiti Support and Help Center. UniFi Video is an obsolete product line. This application and its related devices will no longer receive any manner of technical support, including functional and security updates Go to Configure => Templates => Feature tab on the vManage GUI. Locate the vedge-vpn20 Feature Template and click on the dots next to it. Choose to make a Copy of this template. Rename the template vedge-vpn20-DC with a Description of VPN 20 Template for vEdges at the Data Center and click on Copy. Click on the dots next to the newly created template and choose to Edit it

Huawei ONT WAN DHCP configure by web browser - YouTub

Cisco 3G Wireless WAN Configuration Example. In this lesson, you will learn how to configure your Cisco router to use its 3G / UMTS / HSPDA WAN interface. I'm using a HWIC-3G-GSM WAN card but the configuration will be very similar for most of the cards out there. Even if you are using 4G / LTE this will be very useful Configuring the vEdge VPN 20 Feature Templates. Locate the vedge-vpn10 template created and click on the three dots next to it. Choose to Copy the template. Rename the template to vedge-vpn20 with a Description of VPN 20 Template for vEdges.Click on Copy. Choose to edit the newly created vedge-vpn20 template. Make sure the Description is updated and change the VPN field to 20

Copy to Clipboard. apt-get install snmp snmpwalk -v2c -c GokuBlack 192.168.15.11. 1. apt-get install snmp. 2. snmpwalk -v2c -c GokuBlack 192.168.15.11. Keep in mind that you need to change the SNMP community name and the PFsense IP address to reflect your environment. To test the Pfsense SNMP configuration from a computer running Windows. SD-WAN/ADVPN configuration. This section provides an understanding of the Fortinet Secure SD-WAN configuration. The main objective of this section is to provide details on how to configure SD-WAN to cover the following use cases: ADVPN; QoS; The following topics consider one FortiGate as datacenter and two FortiGates as branch offices However, some protocols, such as VoIP, will have problem if they use a WAN with NAT in such a configuration. If at all possible, contact the ISP and have them configure the WAN circuits such that they are in different subnets with different gateways. One exception to this is a PPP type WAN such as PPPoE

Using DNS over HTTPS (DoH) with OpenDNS. Windows 10 Configuration. OSX Yosemite and El Capitan. FamilyShield Computer Configuration Instructions. Special Case: Satellite Internet (HughesNet, Etc) Configuring Computer-Configured Broadband Network (PPPOE) Configuration for Windows computers. Windows 8 Configuration. Windows 7 Configuration • WAN/DMZ (LRT224):LRT224 Dual WAN Gigabit VPN Router comes with a port you can configure as a second WAN port or DMZ port based on your network requirements . NOTE Dual WAN settings, such as link failover or load balance, will be disabled when you configure the port as DMZ port

Huawei HG8245 ScreenshotsObtaining administrator access on Huawei HG8247H · theZedtHuawei HG8247 WAN Configuration Router Screenshot

Huawei HG8245H Configuration Guide - OpenDN

Huawei HG8245H Screenshots

Setting up WAN Internet Access for Ethernet WA

Configure WAN survivability, Health Check, Optimization and PAN portal settings for the branch controllers in a branch config group by navigating to Configuration>Branch>Smart Config and selecting the WAN tab. The settings on the WAN tab are described in the table below The purpose of SD-WAN is to control the internet traffic at Layer 2 without having to use hardware-based switches or WAN load-balancing equipments. Sample Configuration; Based upon the sample on this graph, we will distribute 75% of the Internet traffic to ISP1, which is connected to WAN1, and 25% to ISP2, which is connected to WAN2 with the. Configuring a WAN (versions 10.5 and earlier) Welcome to Ecessa Support, we have a variety of technical information and tools for a variety of solutions. If you aren't finding a solution, or would like to talk to a technical support team member, please call 800-669-6242. See Ecessa's full line of products and solutions a WAN connection between the centralized database and the remote location allows the remote users full access to the resources. Configuring T1/E1 WAN applications includes six steps: 1. Configure the physical interfaces (Ethernet and WAN interfaces) 2. Configure the L2 protocol(s) 3. Bind the physical and virtual (L2) interfaces 4 Go to the Firewall > Rules > NAT > Port Forward page to create a NAT port forward rule. In the example below, assume there is a web server in the DMZ network. Like with the WAN rule, the WAN interface will be the default selection for the Interface dropdown. The first several options are identical to the WAN rule except the port is.

AXE11000 WAN Configuration. Hi, I got new AXE11000 router, I need to setup PPPoE WAN connection, to connect I need to manually enter Manual clientid Option 61 to make internet work on vlan10. Anyone have idea to how to enter this value? as I cannot see these options in Advance WAN page, I am using latest firmware How to configure FreeS/WAN. This page will teach you how to configure a simple network-to-network link or a Road Warrior connection between two Linux FreeS/WAN boxes. See also these related documents: our quickstart guide to opportunistic encryption; our guide to configuration with policy groups; our advanced configuration documen My personal suggestion however is to have both routers on the same network e.g. 192.168.1.1 and 192.168.1.2, connect the secondary router using a LAN port and enable DHCP only on the primary router connected to the internet. This is usually the easier setup and makes it much easier to have devices on different routers communicate with each other

Step 1: Configure create SD-WAN Interface. Click on Volume to modify the Weight parameters for two WAN lines according to the demand. Here I will configure Failover so the parameter will be 1 and 0. 1 for the line you want to be Primary, 0 for the road you want to be Backup. Then all traffic will go through the main line Single physical ethernet WAN link. Multiple VLANs on WAN interface (802.1Q trunking) Procedure. Create VLANs - VLAN Trunking Configuration. Assign attributes to each VLAN and name uniquely. Set the VLAN mode to WAN. Add port 0 and set mode to Tagged. Creating new VLANs will create new WAN profiles in Connection Manager I currently have Edimax dual wan router connected to my home network. Comcast provides cable broadband & Verizon DSL provides 2nd broadband connection. Both provide 15mbs, which is best I can get in my area until Fios is available via Verizon. 9/1/07 is target available date at this time for.. Wide Area Network (WAN) settings let you control how Google Nest Wifi and Google Wifi connect to the internet. The type of WAN connection you have is generally determined by your Internet Service Provider (ISP).. In WAN settings, you can choose from one of the WAN types below and configure their respective settings

SD-WAN with Versa Networks: Configuration. From the Configuration tab, you can view and edit the configuration of your SD-WAN appliances or templates. If the configuration is viewing the appliance, then it uses the as-running config on the box, which is the combination of the device, QoS, SD-WAN and firewall templates, and the device bind data admin@T3-Spoke-1-cli> show orgs org Tenant-3 sessions sdwan brief VSN VSN SESS SOURCE DESTINATION TX ID VID ID SOURCE IP DESTINATION IP PORT PORT PROTOCOL NATTED SDWAN APPLICATION RX WAN CKT TX WAN CKT BRANCH ----- 0 2 11719 52.206.125.160 10.10.30.30 443 40926 6 No Yes - Internet:Internet Internet:Internet T3-Hub-1 0 2 11720 10.10.30.30 13.249. Method 1: CloudTrax configuration. If you are able to get the router online via an alternate or temporary arrangement, then you can simply configure the static IP information for the router in CloudTrax and then install the router after the change is saved to the router. This also works if you need to update the WAN configuration in the future

HG8245Q Bridge Mode with DrayTek Vigor 2926 - YouTub

On the Properties panel, go to Ports > WAN Ports and click on Configure Interfaces section to assign the WAN networks. Note: To switch the WAN Networks, first change the Port WAN1 Network from WAN to Disabled, then change the Port WAN2 Network from WAN2 to WAN. See the Configuring Port Remapping article for more information. 6 pfSense will ask you whether you want to configure the IPv6 WAN address through DHCP6. You can typeyif your ISP supports IPv6 addressing, or typen, in which case IPv6 addressing for the WAN interface will be disabled.; pfSense will ask you whether you want to revert to HTTP for the webConfigurator protocol. Unless you have a reason for not using HTTPS for the web GUI, type n and press Enter Step 2. Select the type of device for which you are creating the template. Step 3. Enter the name of template. Step 4. Enter a description for the device template. Step 5. In the CLI Configuration box, enter the configuration either by typing it, cutting and pasting it, or uploading a file. Step 6

Solved: WAN & LAN Configurations - Cisco Communit

The Configure WAN link blade opens. Specify values for the following: Name - Enter a name for your uplink. Type - Select dynamic from the drop-down list. Port - Select the port where your uplink is connected to. Default for DHCP connections is p4, except model T93 where DHCP is located on p2. Note: Port 1 is reserved for high availability Configure Interfaces in the WAN Transport VPN (VPN 0) VPN 0 is the WAN transport VPN. This VPN handles all control plane traffic, which is carried over OMP sessions, in the overlay network. For a Viptela device to participate in the overlay network, at least one interface must be configured in VPN 0, and at least one interface must connect to a.

Connecting to a WAN Using a Fixed IP Address - AR500

In this video, Steve Hollar demonstrates how to configure the SD-WAN features of the Cisco Meraki MX appliances. The first part of the video shows how to enable a site to site VPN configuration and enable BGP to exchange routes with the core router. The second part of the video showcases the SD-WAN policy configuration of the Meraki MX appliance. Non VMware SD-WAN Site Configuration Workflow. This is an optional service that allows you to create VPN tunnel configurations to access one or more Non VMware SD-WAN Sites. The VMware provides the configuration required to create the tunnel (s) - including creating IKE IPSec configuration and generating a pre-shared key Configuring failover for multiple WAN interfaces on Fortigate is really easy. Basically, when you have multiple WAN/ISP you just need to plug each of it to any interface, set the interfaces role to WAN, configure static or DHCP mode, configure static route (if the interface in static mode), configure firewall policy to allow traffic from internal LAN to each WAN interfaces, and you already.

PMG5317-T20B Wireless N GPON HGU with 4-port GbE SwitchAtlantis Land Router Configuration (interface 1)Hot Sale 802

The configuration after a fresh flash will contain network, dhcp and firewall settings for 'wan' and 'lan' interfaces by default. There are two firewall zones ' wan ' and ' lan '. Usually, I change the ' lan ' interface address to 192.168.2.1, instead of the default 192.168.1.1, and this can be done using the below uci commands Dedicated SIP trunk WAN Config Problem. We are working with a carrier with the following setup. Internet is an Ethernet hand-off into the WAN port of the router> from router LAN to managed switch> UCM LAN to managed switch. SIP trunk is a dedicated Ethernet hand-off that does not touch the internet and is configured into the UCM WAN port Re:WAN configuration for Archer MR600 2021-03-11 06:51:16 - last edited 2021-03-11 06:54:25 @WhatToDo I am fighting to get my MR600 to work in Wireless Router Mode too With VPN/WAN event, we could adjust the severity from the System > System Parameter ID 29 and 30. Configure and check the Alarm. 1. Select the CPE which you'd like to monitor: WAN Alarm: Go to CPE Configuration > WAN > Internet Access and click one of the WAN interfaces which you'd like to monitor. Enable the alarm and Save the Setting Multi-site (WAN) Configuration. Use the multi-site configuration to scale horizontally between disparate, loosely-coupled distributed systems. A wide-area network (WAN) is the main use case for the multi-site topology. The Apache Geode multi-site implementation connects disparate distributed systems. The systems act as one when they are coupled.

  • آيات بسيطة من الكتاب المقدس.
  • تكلفة القطار المعلق.
  • تأثير الجوال على الطالب.
  • Cabin Fever 2002 مترجم.
  • مدة الجبيرة للاطفال.
  • اماكن تدريب كرة السلة بالقاهره للبنات.
  • عملة تركمانستان.
  • مصحف الفهد.
  • من مدفون في سامراء.
  • توأم الروح هو ذلك الشخص.
  • كباث للبيع.
  • الطيور والجن.
  • تزيين الأظافر 2020.
  • سيارات جولف للبيع.
  • لماذا الطفل الرضيع يبصق.
  • الاتصال بين الحيوانات PPT.
  • هل رجل السرطان خاين.
  • الكحل الدائم.
  • كيفية صلاة التوبة.
  • قصة بناء الكعبة ووضع الحجر الأسود.
  • ثغرات اختراق حساب فيس.
  • ألوان تجلب الرزق.
  • موتسكلات ريس صغيرة.
  • غريفين جونسون.
  • بيحن للنغم الوتر ارب ايدول.
  • مفهوم الحرية وأنواعها.
  • Richard Linklater.
  • زهرة البازلاء الفراشة.
  • حفارة للبيع.
  • أيهما أذكى الذئب أم الثعلب.
  • Squamous cell carcinoma بالعربي.
  • سيبرو نقط.
  • أنباء السويداء.
  • إجراءات تركيب عداد كهرباء 2020.
  • يلوستون مسلسل تلفزيوني.
  • سعر كاميرا كانون 600D مستعملة.
  • استخدامات الضوء المرئي في الطب.
  • الدكتورة رنا الزبدة.
  • حمالة أطفال على الكتف.
  • فيلم جاك نيكلسون الجوكر.
  • أنواع الأصدقاء بالانجليزي.